Difficulty
Easy
Steps
4
Time Required
00:30:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Describe what you are going to do.
Tools
Parts
-
-
Start by disconnecting the lower hose (having previously placed a basin underneath to collect the liquid)
-
-
-
Disconnect the liquid level sensor
-
Disconnect the hose going to the coolant reservoir
-
Disconnect the upper hose
-
Disconnect the fan resistor
-
-
-
Unscrew the two screws securing the grille then remove it upwards
-
Unscrew the two radiator fixing screws, then extract it upwards (about 5 cm) to release it from the lower supports, then remove it from the engine compartment from below.
-
-
-
Check that the new radiator is identical
-
Retrieve the pressure switch if necessary.
-
Proceed in the reverse order of removal for reassembly.
-
End with a coolant purge (From step 2)
-
Cancel: I did not complete this guide.
One other person completed this guide.
