Tools
Parts
-
-
Start by opening the trunk and loosening the two nuts plastic cover.
-
Remove the cover.
-
-
-
Outside, gently pull the optical block, whose two threaded rods have just been released, in order to be able to unclip the two plastic legs (second photo) which hold part of the block.
-
-
-
We now have access to the four bulbs, which will simply need to be removed by making a quarter turn to the left and replacing it/them.
-
Be careful not to touch the bulbs with your fingers, or failing that, clean them properly so as not to leave any greasy residue.
-
Finally, do all these steps in reverse order. Take the opportunity to clean the location of the optical unit, and remember to tighten the plastic nuts well to ensure a good seal.
-
The procedure will be the same for the left side.
-
Cancel: I did not complete this guide.
2 other people completed this guide.
