Difficulty
Easy
Steps
8
Time Required
00:20:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
This tutorial shows how to change the air flow meter on Citroen C5 1.6 hdi 110
Tools
Parts
-
-
Connect the diagnostic tool to the car's OBD socket and turn on the ignition
-
the car displays a P0104 fault on the suitcase: air intake sensor - open circuit, short circuit to + or ground
-
Remember to turn off the ignition after the diagnosis.
-
-
-
unscrew the 2 hose clamps, 7mm wrench (or screwdriver)
-
unclip the plastic part of the pipe (be careful, this part is fragile)
-
dislodge at the flow meter and turbo and remove the line
-
-
-
lift the air box slightly to dislodge it (there are 4 lugs in total)
-
unscrew the 3 flow meter retaining screws, 8mm wrench
-
remove the flow meter
-
-
-
compare flow meters
-
I opted for second-hand but you can of course use a new part.
-
take care to compare references
-
-
-
oil the flow meter O-ring
-
install the flow meter
-
screw in its 3 fixing screws, 8mm key
-
-
-
put the air box back in place in its 4 lugs
-
install the air duct (clip the central part)
-
screw the 2 collars, 7mm key
-
-
-
connect the flow meter plug (you should hear a "click")
-
put in place the top cover
-
turn on the ignition and clear the fault
-
Cancel: I did not complete this guide.
One other person completed this guide.
