Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Replacing the brake light switch on a Peugeot 206

Written By: scorpio_51 (and 2 other contributors)
  • Comments: 8
  • Favorites: 0
  • Completions: 12

Difficulty

Very easy

Steps

5

Time Required

00:10:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

If you notice that your 3 brake lights are no longer working, it is very likely that your 3 bulbs did not fail at the same time. The problem may therefore come from the brake light switch which is located above the brake pedal.

Tools

No tools specified.

Parts

  1. Locate the switch, it is located just above the brake pedal To disassemble it, simply turn it counterclockwise. Then disconnect it from its connector by pressing the small clip.

    • Locate the switch, it is located just above the brake pedal

    • To disassemble it, simply turn it counterclockwise.

    • Then disconnect it from its connector by pressing the small clip.

    • Switch disassembled

    Edit

  2. The old switch

    • The old switch

    • The new switch

    • Pull out the adjustment rod completely, as shown in the photo (delivery condition)

    Edit

  3. Verify that this is the faulty part by bypassing the switch. To do this, insert a conductive wire between the 2 connectors as shown in the image.

    • Verify that this is the faulty part by bypassing the switch.

    • To do this, insert a conductive wire between the 2 connectors as shown in the image.

    • If the brake lights come on then this is the faulty part.

    Edit

  4. Mount the new switch, inserting it into the hole. The connector must be horizontal. Then turn it clockwise to fix it The rod adjustment is done automatically during assembly

    • Mount the new switch, inserting it into the hole. The connector must be horizontal. Then turn it clockwise to fix it

    • The rod adjustment is done automatically during assembly

    • Once the switch is back up

    Edit

  5. Reconnect the connector Check that the brake lights are working again by turning on the ignition and pressing the brake pedal.

    • Reconnect the connector

    • Check that the brake lights are working again by turning on the ignition and pressing the brake pedal.

    Edit
Finish Line

12 other people completed this guide.

Author

with 2 other contributors

scorpio_51

Member since: 11/08/2015

1,170 Reputation

9 Guides authored

8 Comments

This tutorial allowed me to change my contactor in a few minutes. Perfect and very well explained. Kind regards.

PAUL Laurent - Resolved on Release Reply

Cool 5 minutes to change it.

Thanks for the help

luc.girard30 - Resolved on Release Reply

Too good. I changed the part in less than 10 minutes. Thanks for this tutorial

claudie.boitet - Resolved on Release Reply

Does not match the switch shown in the summary. The latter does not have a fixed lock predetermined by the manufacturer and requires manual adjustment using notches.

jpfourcroy - Resolved on Release Reply

Thanks to you I was able to repair my brake switch and now it works. It's on my Peugeot 206 sw. Your tutorial is very clear. Really thank you. Franck. Mallejac on 06/17/2020

franck mallejac - Resolved on Release Reply

Add Comment

View Statistics:

Past 24 Hours: 10

Past 7 Days: 95

Past 30 Days: 332

All Time: 40,572

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.