Skip to main content

Introduction

This tutorial helps you to change the spark plugs on C3 Picasso 1.4L VTI 95CV

  1. Bring the vehicle documentation and the tools needed for the operation, without forgetting the protective equipment (goggles, gloves, etc.). Get a 14mm 12-sided long spark plug wrench Disconnect the battery to begin.
    • Bring the vehicle documentation and the tools needed for the operation, without forgetting the protective equipment (goggles, gloves, etc.).

    • Get a 14mm 12-sided long spark plug wrench

    • Disconnect the battery to begin.

  2. Remove the two torx screws from the cover. Proceed spark plug by spark plug by disconnecting the first coil and changing the spark plug, then fit the new spark plug, reconnect the coil and move on to the next one. Proceed spark plug by spark plug by disconnecting the first coil and changing the spark plug, then fit the new spark plug, reconnect the coil and move on to the next one.
    • Remove the two torx screws from the cover.

    • Proceed spark plug by spark plug by disconnecting the first coil and changing the spark plug, then fit the new spark plug, reconnect the coil and move on to the next one.

  3. Check and replace the spark plugs. Reassemble the coils. Replacing the cover
    • Check and replace the spark plugs.

    • Reassemble the coils.

    • Replacing the cover

    • Reconnect the battery.

Finish Line

2 other people completed this guide.

afeltra.ciro

Member since: 09/28/2017

643 Reputation

11 Guides authored

One Comment

another good tutorial, I would add that you need long nose pliers to retrieve the 14 socket (in the tunnel) if it has a rubber to hold the spark plug. Thanks

gilles chêne - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 24

Past 30 Days: 98

All Time: 7,374