Difficulty
Very easy
Steps
7
Time Required
00:30:00
Ce tutoriel a été créé par la communauté
User contributed
Tools
-
-
pinch the cover at the red arrows and pull towards the front of the car to remove it
-
unscrew the screw that holds the other cover with a small crosshead screwdriver
-
push the cover up and pull it back towards you to remove it
-
-
-
unscrew the two black plastic nuts that secure the light
-
if it is blocked use a multi-grip pliers
-
pull the fire back to dislodge it
-
move the fire away to access the socket
-
the fire is still plugged in so don't pull too hard on it
-
-
-
the plug is disconnected via a metal clip (red arrow in the photo)
-
press the clip with a flat screwdriver and lift the socket with the other hand
-
the plug must come out
-
-
-
present fire
-
To plug in the plug, simply press it (you should hear a "click")
-
-
-
it will be necessary to make the lugs and the threaded rods coincide in their housing
-
bring the fire in and make sure everything is in place inside
-
screw the plastic nuts
-
-
-
present the outer cover from the top and press down
-
Push the cover in and screw it in with the Phillips screwdriver
-
reclip the inner cover by pressing on it
-
