Difficulty
Very easy
Steps
8
Time Required
00:30:00
Ce tutoriel a été créé par la communauté
User contributed
-
-
Open the driver's door
-
Pull the handle towards you to open the hood.
-
Pull the small plastic tab towards you to unlock the hood.
-
Open the hood and lock it.
-
-
-
The bulb is held in place by two metal rods.
-
Proceed one by one.
-
To remove them, you have to push the rod in and then push it outwards.
-
Remove the bulb
-
-
-
Step may be different depending on the bulb models.
-
On this one you have to remove the LED ring and place the ring first.
-
Pull the ring to remove it.
-
-
-
First you have to put the ring on.
-
Place the triangle and the outgrowth on top.
-
Replace the metal rods to secure the ring.
-
Push the LED into the ring.
-
-
-
Align the triangle on the LED with the triangle on the ring.
-
To do this, rotate the LED.
-
Some LED bulbs have large housings and therefore do not fit completely into the optics. You must therefore pierce the plastic cover to pass the cable and fix the housing to the outside (with a rislan for example). For a good seal you can make a silicone seal around the cable in the plastic cover.
Some LED bulbs have large housings and therefore do not fit completely into the optics. You must therefore pierce the plastic cover to pass the cable and fix the housing to the outside (with a rislan for example). For a good seal you can make a silicone seal around the cable in the plastic cover.
Cancel: I did not complete this guide.
One other person completed this guide.
