Difficulty
Moderate
Steps
4
Time Required
01:00:00
Tutoriel complet
Ce tutoriel contribué par la communauté est complet et prêt pour l'examen de l'équipe Oscaro.
Ce tutoriel a été créé par la communauté
User contributed
-
-
Bring the vehicle documentation and the tools needed for the operation, without forgetting the protective equipment (goggles, gloves, etc.).
-
Change the connecting rods in pairs.
-
-
-
Loosen the wheel nuts and place the vehicle on jack stands.
-
Secure the vehicle, it is imperative that the jack stands do not support the vehicle by the front axles, so as not to put the stabilizer bar under stress.
-
Unscrew the wheel nuts and remove the wheels.
-
-
-
Unscrew the two nuts.
-
use the correct tools to remove the nuts without rotating the tie rods.
-
-
-
Compare the old and new parts to ensure compatibility.
-
Reassemble the new connecting rod in the same way so as not to damage it.
-
Reassemble the wheels and put the vehicle back down.
-
Cancel: I did not complete this guide.
One other person completed this guide.
