Tools
No tools specified.
-
-
The sensor is located on the hose that runs from the EGR valve to the intercooler.
-
-
-
Unclip the sheath from the hook.
-
Move the sheath out of the way so that it is not in the way when you remove the sensor.
-
-
-
The sensor is not screwed in, just forced in so there is no need to turn it, you just have to pull.
-
Reassembly is carried out in reverse order.
-
Cancel: I did not complete this guide.
2 other people completed this guide.
2 Comments
Hello, is it the same principle for a 320d 177hp? Is the probe in the same place?
Hello, do you have a tutorial for 635d (bmw 6 series e63) m57tu2top engine please? Thanks
