Difficulty
Moderate
Steps
4
Time Required
01:00:00 - 02:00:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Engine oil change and oil filter on SEDICI 1.6l petrol engine type M16A
-
-
Mounting on drain ramps is possible because the plug is pointing towards the rear
-
oil + tools.
-
-
-
First open the hood under the steering wheel on the left. Then press the trigger under the hood above the radar logo. Unscrew the filler cap.
-
-
-
we go underneath to remove the protective plate fixed with 13 screws including 6 cross-head screws (blue) and 7 hexagonal head screws (red).
-
Drain the oil by loosening the filler plug, 14 hex key. And reassemble the drain plug.
-
disassembly of the oil filter, pay attention to the small shower and reassembly, following cleaning of the joint plane. hand tightening 3/4 turn after contact of the surface of the joint plane with the engine part.
-
-
-
3.8 Liter with filter change.
-
0W20 oil
-
Remember to start the engine to fill the oil filter. Check the level with the dipstick, after letting the oil settle.
-
Information from the SUZUKI manual.
Information from the SUZUKI manual.
Cancel: I did not complete this guide.
6 other people completed this guide.
12 Comments
Good morning,
All methods of resetting the engine oil life meter do not work with my 2016 vitara 1.6 diesel.
No 'oil' item in the dashboard menu (so no reset).
and FABIEN FERNANDEZ's method with the brake pedal does not work with my vehicle (same engine as him).
If anyone has another idea, I'm interested.
THANKS
Very clear tutorial, thank you!
What size is the drain gasket?
Thank you very clear tutorial,
Hello, on the odb menu of the Vitara diesel 1.6 ddis the oil reset does not appear
Good morning,
Doesn't work with my vehicle (same engine year 2016). Any other ideas?
