Deleted

Written By: sebastienherbomel (and 4 other contributors)

Comments: 19
Favorites: 0
Completions: 11

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Finish Line

11 other people completed this guide.

Author

with 4 other contributors

sebastienherbomel

Member since: 03/06/2016

7,564 Reputation

52 Guides authored

Team

Team Renault Member of Team Renault

1 Member

52 Guides authored

19 Comments

Good evening,

Thanks for the tutorial that helped me a lot, I just wanted to know because when I disassembled it I saw that the ball joints were filled with grease and I didn't put any on the new ball joints, do I have to disassemble it again to put some? Thanks for the answer.

Virtues.

Didier MOUREN - Oct 8, 2020 Resolved on Release Reply

Hello Didier, thank you for this comment. For my part, the address is not necessary because the ball joints are of interest to the manufacturer before installation.

sebastienherbomel - Oct 8, 2020

Is your Tulip extractor a 35/45? I have a Scénic 2 1.5 dCI 106CV 2007 166000km, following my MOT, I have the same thing to do as you.

THANKS.

gerard.tacaille - Feb 14, 2019 Resolved on Release Reply

Yes, that's it, in the third photo of the step we can see the diameters written on the tools.

sebastienherbomel - Feb 14, 2019

Hello

What diameter do I need to loosen the axial ball joint?

I have a Rover 216 GTI on the RTA it is not indicated thank you

Christophe Combredet - May 6, 2018 Resolved on Release Reply