Deleted

Hello, thank you for this excellent tutorial. What are these captive nuts? They are not supplied with my hitch..

Do you have any photos of the 12V power supply from the electronic box to the front fuse box???

The towbar kit is actually quite simple to fit but you need a lot of patience when putting the screws through the cage nuts...it's very difficult to keep them aligned while positioning the towbar.

I had to lock them on the outer leg side with American tape to keep the threads exactly opposite the holes.

Then for the wiring part, nothing corresponded with the 206 petrol of 2000 (non-multiplexed). By searching on forums I found the right wire colors:

1. Left turn signal = white wire (left)

2. Fog light = blue (wire goes into the light below)

3. Mass

4. Right indicator = coffee (right)

5. Right rear position lights = red (right)

6. Stop lights = white (right)

7. Left rear position lights = yellow (left)