Introduction
Vehicle engine 1.4 HDi 70 hp
Tools
Parts
-
-
Open the engine hood. Remove the engine cover.
-
The turbocharger boost hose is located between the air box and the turbocharger.
-
The hose is damaged at the turbocharger clamp.
-
-
-
Unscrew the two screws of the air flow meter fixed on the air box
-
Disconnect the electrical connector
-
-
-
The hose is attached to the breather which is fitted onto the rocker cover.
-
Remove the hose from its three connection points
-
-
-
Loosen the clamp on the turbocharger and remove the remaining piece of hose
-
Remove the mounting collar with a flat screwdriver
-
Separate the hose and the flow meter
-
-
-
Fit a new hose clamp on the new hose, diameter approximately 67 mm
-
Align the hose's key with the notch on the flow meter
-
Replace the hose clamp on the turbocharger side, diameter approximately 32-52 mm
-
Clean the turbocharger inlet
-
-
-
Present the hose in front of the three holes
-
Install the hose
-
Tighten the clamps and fixing screws
-
Reconnect the flowmeter connector
-
Cancel: I did not complete this guide.
One other person completed this guide.
