Introduction
This tutorial explains how to change the spark plugs on Twingo 1 phase 2 1.2i 60 CV
Parts
Video Overview
-
-
Remove the 4 four cables from the ignition harness by pulling upwards
-
Carefully identify the cables of each spark plug well.
-
-
-
Position the ratchet with the extension and the socket 10 on the spark plugs and loosen it.
-
Unscrew the spark plug and carefully remove the spark plug.
-
-
-
Remove the spark plug from the socket
-
Compare the new spark plug and the old one (thread length and diameter) as well as the shape of the spark plug gasket type
-
-
-
Insert the spark plug into the socket
-
Carefully dip the candle into its well
-
-
-
Screw the spark plug in with the extension
-
Tighten the spark plug using the ratchet
-
Do not overtighten the spark plug.
-
Reposition the cable of the ignition harness by pressing it until you hear the clips
-
Make the change on the 4 spark plugs
-
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
5 Comments
Hello, what is the engine please?
I'm looking for a tutorial to change my twingo 2004 automatic coil. You sent it well. Thank you.
Yes! Very good, but it's been more than 96 hours since I ordered my candles and I still haven't received them even though they should be delivered in 24 to 48 hours.
Hello, I would like to equip myself with a ratchet extension to change my Twingo spark plugs, but what size? (it goes from 5 to 25 cm)
Very good thank you
