Parts
Video Overview
-
-
Unclip the intake duct
-
Unscrew the four Torx screws
-
Remove the air box
-
The 4 candles are accessible
-
-
-
Unclip the power cable
-
Unscrew the spark plugs with the 14 socket.
-
Clean the 4 spark plug wells with a blower
-
Remove your spark plugs using a rubber tube
-
-
-
Compare the correspondence of the old and nouvelles bougies d'allumage
-
With votre jauge d'huile , put oil on the spark plug thread
-
Slide the candle inside the well with the tube then screw
-
-
-
Tighten your spark plugs (with your spark plug wrench socket) without forcing too much to avoid breaking the spark plug.
-
Reclip the connectors
-
Repeat the same operation for the 4 candles
-
-
-
Reposition the front of the filtre à air and screw in the 4 screws
-
Replace the intake duct
-
Start the engine for checking
-
Cancel: I did not complete this guide.
6 other people completed this guide.
3 Comments
Good morning,
These spark plugs work perfectly on my twingo 1 phase 2 with a displacement of 1149 cm3 petrol 55Kw
clement lanthiez - Resolved on Release Reply

