Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Changing the intermediate steering lever on Mitsubishi Pajero

Written By: VERGNE SCEA (and one other contributor)
  • Comments: 1
  • Favorites: 0

Difficulty

Easy

Steps

9

Time Required

00:35:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

Here is a tutorial to help you change the intermediate steering lever on a Mitsubishi Pajero 1 2.5 TD Break 95cv

  1. park the pajero on the flat

    • park the pajero on the flat

    Edit

  2. position the jack at the chassis side member at the front of the pajero Loosen the wheel nuts with a 21 key without unscrewing them all the way

    • position the jack at the chassis side member at the front of the pajero

    • Loosen the wheel nuts with a 21 key without unscrewing them all the way

    • then lift the pajero with the jack

    Edit

    • unscrew the 6 nuts then remove the wheel

    Edit

  4. Place a jack near the jack on the beam so that you can work safely. Place a jack near the jack on the beam so that you can work safely.

    • Place a jack near the jack on the beam so that you can work safely.

    Edit

  5. here is the lever remove the pin remove the pin

    • here is the lever

    • remove the pin

    Edit

  6. unscrew the nut with a 17 key unscrew the 3 nuts with a 15 key with a ball joint puller you have to extract the lever ball joint

    • unscrew the nut with a 17 key

    • unscrew the 3 nuts with a 15 key

    • with a ball joint puller you have to extract the lever ball joint

    Edit

  7. on the left the new lever and on the right the broken lever

    • on the left the new lever and on the right the broken lever

    Edit

  8. fix the new lever the same way the other one was fixed

    • fix the new lever the same way the other one was fixed

    • reassemble in the reverse order of disassembly, remembering to replace the pin

    Edit

    • position the wheel in its place and tighten the 6 nuts

    • then lift the pajero with the jack

    • remove the candle

    • put the pajero on the ground and remove the jack

    • lock the 6 wheel nuts

    • here it is finished

    Edit
Finish Line

Author

with 1 other contributor

VERGNE SCEA

Member since: 2/3/17

219 Reputation

2 Guides authored

One Comment

Very well done thank you

vincent fouré - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 12

All Time: 2,635

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.