Skip to main content
  1. 
First of all, unplug the "less" from the battery
  2. 
For this operation you need a funnel, a bin to recover the oil and a pipe such as an aquarium pipe, with an internal diameter of 10mm, a length of 1m is more than enough.
    • For this operation you need a funnel, a bin to recover the oil and a pipe such as an aquarium pipe, with an internal diameter of 10mm, a length of 1m is more than enough.

  3. 
Assemble the end of the funnel and the aquarium hose to obtain this assembly. Note that the funnel provided in the drain kit

Assemble the end of the funnel and the aquarium hose to obtain this assembly. Note that the funnel provided in the drain kit
    • Assemble the end of the funnel and the aquarium hose to obtain this assembly. Note that the funnel provided in the drain kit

  4. 
You also need a square bit for the gearbox cap.
    • You also need a square bit for the gearbox cap.

  5. 
First, unscrew the filler cap located on the right side of the box.

It is accessed by passing behind the wheel,

Do not necessarily remove the wheel, simply add an extension to the ratchet wrench.
    • First, unscrew the filler cap located on the right side of the box.

    • It is accessed by passing behind the wheel,

    • Do not necessarily remove the wheel, simply add an extension to the ratchet wrench.

  6. 
Reach the filler cap.
    • Reach the filler cap.

  7. 
Unscrew the drain plug located under the box slightly but not completely.

Place the tray under the box and finish unscrewing.
    • Unscrew the drain plug located under the box slightly but not completely.

    • Place the tray under the box and finish unscrewing.

    • Let it all flow the oil. Then screw the cap back on.

  8. 
Insert the 2 or 3 cm pipe into the filling hole, all you have to do is fill. The box contains 1.8 liters, use 80W90 oil preferably corresponding to the API GL-4 standard.

Fill in small doses, and wait until the oil has completely gone down into the box, when it is full it will start to overflow, as soon as this stage is reached, quickly close it.

Reconnect the battery
    • Insert the 2 or 3 cm pipe into the filling hole, all you have to do is fill. The box contains 1.8 liters, use 80W90 oil preferably corresponding to the API GL-4 standard.

    • Fill in small doses, and wait until the oil has completely gone down into the box, when it is full it will start to overflow, as soon as this stage is reached, quickly close it.

    • Reconnect the battery

Finish Line

7 other people completed this guide.

baptiste chardin

Member since: 06/10/2016

109 Reputation

1 Guide authored

3 Comments

Great thanks for the details like the capacity and type of oil!

very useful, we are impatiently waiting for the other tutorials for R4!

Antoine DEHOUVE - Reply

Hello, it is indeed a 10 mm square, greetings

Mickael BELZ - Reply

Good morning,

Could you please confirm which socket you used for this operation? (10mm square?)

Sincerely,

David

David Sauvourel - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 8

Past 30 Days: 53

All Time: 10,229