Skip to main content

Tools

No tools specified.

  1. 
unscrew the 2 light fixing screws symbolized by the beacon Rouge

unscrew the 2 light fixing screws symbolized by the beacon Rouge
    • unscrew the 2 light fixing screws symbolized by the beacon Rouge

  2. 
Raise the paw marked by the tag Rouge then pull the connector backwards arrow green

pull the entire gray plate backwards using right/left rocking movements to detach the seal
    • Raise the paw marked by the tag Rouge then pull the connector backwards arrow green

    • pull the entire gray plate backwards using right/left rocking movements to detach the seal

  3. 
replace the 3 bulbs whose locations are marked in Rouge

up P21/5w
    • replace the 3 bulbs whose locations are marked in Rouge

    • up P21/5w

    • middle and bottom: p21w

    • in red a used bulb

    • in orange a new orange bulb

    • in green a new colorless bulb

    • in purple an LED alternative

  4. 
Be careful to put the seal back in its housing (rectangle Rouge )

Replace the plate on the lights, the connectors and then the lights in their housing: insert the threaded rods into the holes marked in Rouge

Finally tighten the lights using the plastic screws from the first step (Beacon Rouge )
    • Be careful to put the seal back in its housing (rectangle Rouge )

    • Replace the plate on the lights, the connectors and then the lights in their housing: insert the threaded rods into the holes marked in Rouge

    • Finally tighten the lights using the plastic screws from the first step (Beacon Rouge )

  5. 
test all operating conditions before driving again
    • test all operating conditions before driving again

Finish Line

One other person completed this guide.

Jean-Stephane BEAURAIN

Member since: 05/19/2018

300 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 10

Past 30 Days: 49

All Time: 4,723