Changing halogen dipped beam bulbs on Golf VII

To change your low beam bulb, you will need to open your hood thanks to the hatch located in your Golf 7 below the light control.

Then locate the bulb cover, simply turn on the ignition on your vehicle, leave the headlights on low beam Then the cover is located just behind the light bulb.

You can now unscrew by hand by turning the cover located behind the bulb to then have access to the bulb.

You can now put your hands in the holder For touch the bulb holder.

Be careful to hold it properly when you take it out to avoid dropping it, use both hands if necessary.

By putting your hands in the slot you will feel the support that makes contact with your bulb, hold it in your fingers then turn strongly counterclockwise.

Once removed, hold the support firmly so that it does not fall into the engine compartment otherwise you will have difficulty finding it.

You now have the holder and the bulb in your hands, Pull the bulb upwards to unclip it.

If you can't do it, help yourself with a small flat screwdriver to leverage without dropping the bulb on the floor.

Once the bulb is removed, put the new bulb into the holder respecting its meaning.

Once the new bulb is put back on its holder, put the assembly back together to find the direction in which it will clip turn it gently and you will feel that at some point it will fit easily into its housing.

Once it is pushed in well turn clockwise strongly because it is hard to reclip.

All you have to do is replace the plastic cover just by screwing it into its support.