Video Overview
-
-
The engine must be switched off
-
Remove the cover
-
Unclip and pull upwards
-
-
-
Remove the air intake tube.
-
Unclip the tube then pull it upwards
-
-
-
Unscrew the ten bolt
-
Remove the 2 clips
-
Use a cloth to seal the turbo outlet and radiator inlet.
-
-
-
Unscrew the three bolts
-
Detach the EGR valve
-
Disconnect the connector
-
Compare used EGR valve and new EGR valve
-
-
-
Replace the EGR valve on its support
-
Tighten the 3 bolts
-
Reconnect the connector
-
Reassemble the exhaust pipe
-
Reassemble the hose
-
Replace the cover
-
To check, start the engine.
-
Cancel: I did not complete this guide.
5 other people completed this guide.
Team
2 Comments
See my comment
I don't have the same engine apparently because the pipe comes undone using a 10 key and pay attention to the small oblong inside and once the 2 ends are unclipped, I can take out the pipe and the engine cover, I stopped dismantling because I have the impression that many other parts have to be dismantled, if you have other explanations for dismantling to access the EGR valve, please contact me through my oscaro account
