Skip to main content
  1. First, pull the hood tab next to the clutch pedal towards you to open the hood. Once the tab is pulled, go to the front of the car. To the right of the Renault sign is the second tab to open the hood, put your fingers and push it to your left and the hood opens Once the tab is pulled, go to the front of the car. To the right of the Renault sign is the second tab to open the hood, put your fingers and push it to your left and the hood opens
    • First, pull the hood tab next to the clutch pedal towards you to open the hood.

    • Once the tab is pulled, go to the front of the car. To the right of the Renault sign is the second tab to open the hood, put your fingers and push it to your left and the hood opens

  2. To see the dipped beam bulb, you must remove the cover by pulling on the small tab. Do not confuse with the other cache surrounded in blue Do not confuse with the other cache surrounded in blue
    • To see the dipped beam bulb, you must remove the cover by pulling on the small tab.

    • Do not confuse with the other cache surrounded in blue

  3. Disconnect the plug by pulling on it Once the plug is unplugged, we arrive at this step. To remove the bulb, you must remove the 2 hooks from their location by pushing them slightly towards the bulb and then shifting them to the side. Once the plug is unplugged, we arrive at this step. To remove the bulb, you must remove the 2 hooks from their location by pushing them slightly towards the bulb and then shifting them to the side.
    • Disconnect the plug by pulling on it

    • Once the plug is unplugged, we arrive at this step. To remove the bulb, you must remove the 2 hooks from their location by pushing them slightly towards the bulb and then shifting them to the side.

  4. Compare the old bulb with the new bulb . The low beam bulb for clio 4 is an H7. To reassemble the bulb, nothing complicated, carry out the steps in reverse order. When reinstalling the bulb, make sure that the key (marked in red) is facing upwards.
    • Compare the old bulb with the new bulb . The low beam bulb for clio 4 is an H7.

    • To reassemble the bulb, nothing complicated, carry out the steps in reverse order.

    • When reinstalling the bulb, make sure that the key (marked in red) is facing upwards.

Finish Line

One other person completed this guide.

Abdallah Gottai

Member since: 04/19/2017

305 Reputation

2 Guides authored

2 Comments

and then there is the total mastery of the concordance of tenses which makes reading so enjoyable.

Christophe Juin - Reply

Good morning !

Thanks for this tutorial, however there are some small confusions! This change is for the high beams and not the low beams. And there are inversions between h1 and h7 in the tutorial and the parts needed.

Good luck

Romain DEMAISON - Reply

Add Comment

View Statistics:

Past 24 Hours: 29

Past 7 Days: 167

Past 30 Days: 938

All Time: 53,519