Difficulty
Easy
Steps
4
Time Required
00:15:00
Tutoriel complet
Ce tutoriel contribué par la communauté est complet et prêt pour l'examen de l'équipe Oscaro.
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Engine of the vehicle Peugeot 206 1.6 16V 110 hp
-
-
Disconnect the oil vapor recycling line using a flat screwdriver by pressing on the yellow connector on the hose.
-
While maintaining pressure on the yellow connector of the oil breather hose with the screwdriver, pull the hose towards you to disconnect it.
-
-
-
Unscrew the fixing screw using an 8 mm socket
-
Disconnect the connector with a flat screwdriver or by hand
-
Remove the sensor from its support by pulling it vertically
-
-
-
Replace the new sensor in its location
-
Secure the sensor into the bracket using the 8mm socket
-
Reconnect the connector and check for proper operation by starting the engine
-
Cancel: I did not complete this guide.
4 other people completed this guide.
4 Comments
Hello, I would like to change my air intake sensor and I would like to know the location on a Peugeot 206 2 liter hdi? Is it the same location k on this engine presented in this tutorial?
robinet laetitia0134 - Resolved on Release Reply
206 cc 2.0 (2D) convertible manual petrol
test for proper operation
the intake air temperature sensor
intake pipe pressure sensor
thanks for the answers
matteo regola - Resolved on Release Reply
Hello question how to test its proper functioning thank you
matteo regola - Resolved on Release Reply
Clear and very well done tutorial. Thank you very much.
PATRICK GAUTHIER - Resolved on Release Reply
