Difficulty
Moderate
Steps
5
Time Required
02:00:00
- Change shock absorber cup 5 steps
Tutoriel complet
Ce tutoriel contribué par la communauté est complet et prêt pour l'examen de l'équipe Oscaro.
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Change Shock absorber cup and shock absorber if you purchased them as the steps are the same.
Changing the cups because of play (see video)
Twingo 2004 KENZO 1.2 75 D4F
Video Overview
-
-
Loosen the stabilizer bar link 17mm wrench
-
Loosen the shock absorber screws
-
Loosen the ABS sensor cable bracket
-
-
-
Loosen the anti-rebound cup
-
For this you can use a 21mm long socket and a 6mm Allen that goes through the middle of the socket to prevent the shock absorber rod from rotating.
-
-
-
Compress the spring using the spring compressor until the metal cup is released.
-
Place the three compressors at 120° intervals.
-
Unscrew the nut and remove the elements (ball stop; cup; spacer)
-
-
-
Do the steps in reverse order
-
Tightening torques:
-
Shock absorber screw 110 Nm
-
60 Nm anti-rebound cup
-
Cancel: I did not complete this guide.
One other person completed this guide.
