Difficulty
Easy
Steps
6
Time Required
00:20:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Work carried out on Lucas brand injection pump.
Tools
Parts
-
-
It is located on the injection pump.
-
The solenoid valve is located right next to the diesel supply hose.
-
-
-
Remove the nut with a 10mm socket.
-
Move the electrical cable away.
-
-
-
This operation must be carried out as quickly as possible to avoid the circuit becoming defused.
-
Using a 24mm wrench, remove the solenoid valve.
-
Do not damage injectors or hoses when loosening solenoid valve.
-
Clean the solenoid valve seat.
-
Above all, do not drop anything into the hole!
-
-
-
Reassembly is carried out in reverse order.
-
After use, check the tightness of the solenoid valve.
-
Cancel: I did not complete this guide.
One other person completed this guide.
One Comment
Hello everyone, a Bou from the solenoid valve and falls into the orifice... what to do because the engine no longer starts I don't know what to do to recover it if someone has an idea thank you
