Change front brake disc and pads on Fiat 500

To secure the vehicle click on the link below: Securing the vehicle: removing and refitting the wheel

Remove the cover

Unscrew the 4 nuts then remove the wheel

Release the 2 retaining screws of the disque

Push the piston back l’étrier

Loosen the lower caliper fixing screw

Withdraw les plaquettes de frein

Undo the fixation du flexible de frein, using a wire, hang the stirrup to relieve it

Remove the two caliper bracket screws

Remove the discs

Clean all parts du moyeux with a wire brush

Compare the old and new disc but also the new and old pads

Lightly clean the disc using sandpaper.

Degrease the disc (brake cleaner)

Reposition the 2 screws and tighten them

Reposition the 2 bolts du support d’étrier

Reposition the brake pads, pressing them firmly against the disc. Replace the caliper.

Change the bottom screw and tighten it

Reposition the wheel by tightening the 4 nuts then replace the cover