Change engine mount (timing side) on Renault Clio II

Using a torx key, unscrew the screw located in the red circle to remove the cover.

Place a jack under the engine at the oil pan and lift to relieve the engine mount.

Using a ratchet and a 16 socket or a 16 socket wrench, remove the screw located in the yellow circle.

Make sure the motor does not cause any stress on the 3 screws

Using socket 16, unscrew the screws located in the green circles.

Still using the 16 socket, unscrew the screws located in the pink circles.

Replace the old part with the new one.

To reassemble the screws located in the orange circles, tighten until they are locked but do not force them because the threads are made of aluminum and you risk stripping them.

Replace the cover.

Remove the jack located under the engine.