Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Steering rack bellows on Citroën Saxo

Written By: Antoine vandervoode (and one other contributor)
  • Comments: 10
  • Favorites: 1
  • Completions: 4

Difficulty

Moderate

Steps

7

Time Required

00:40:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

  1. Deposit

    • Deposit

    • Remove the two clamps to remove the air filter housing.

    Edit
  2. Edit

    Why do you need to lift the car?

    Alan dagand - Resolved on Release Reply

  3. Remove the 55 torx screw

    • Remove the 55 torx screw

    Edit

  4. Turn the wheels to dislodge the jack and remove the old bellows

    • Turn the wheels to dislodge the jack and remove the old bellows

    Edit

  5. Apply grease to the cylinder.

    • Apply grease to the cylinder.

    Edit

  6. Install the new bellows, reference for this vehicle: Moog - K150129

    • Install the new bellows, reference for this vehicle: Moog - K150129

    Edit

    Hello. Why are there two bellows in the box? Thank you.

    assayag.david - Resolved on Release Reply

  7. Place the bellows with the two fasteners at each end.

    • Place the bellows with the two fasteners at each end.

    • Replace the screw, taking care to ensure that it is in the jack lug.

    Edit
Finish Line

4 other people completed this guide.

Author

with 1 other contributor

Antoine vandervoode

Member since: 01/13/2019

236 Reputation

1 Guide authored

8 Comments

Hello, Why do you need to lift the car?

Alan dagand - Resolved on Release Reply

Hello, thank you for this tutorial. Is it necessary to redo the alignment after replacing the bellows? Thank you

anthony.bramato - Resolved on Release Reply

Many thanks for this very well explained tutorial.

Be careful to take the recommended parts. I bought from an auto parts supplier to have them immediately, it was adaptable, I struggled to put the bellows on anyway...

sylvie.bertrand34 - Resolved on Release Reply

Thank you very much for your effort and thank you for this TUTORIAL, good luck

younsiibraham - Resolved on Release Reply

Great tutorial, thanks the repair went very well

Nicolas VIVIERE - Resolved on Release Reply

I have to do this repair tomorrow morning, thanks for the tutorial!

BENOIT MICHEL - Resolved on Release Reply

Bonne chance!

thibaut.ansaldi -

Incroyablement simple !

Merci

Grégory Sicard - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 3

Past 7 Days: 19

Past 30 Days: 104

All Time: 16,570

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.