Skip to main content
  1. Deposit
    • Deposit

    • Remove the two clamps to remove the air filter housing.

  2. Remove the 55 torx screw
    • Remove the 55 torx screw

  3. Turn the wheels to dislodge the jack and remove the old bellows
    • Turn the wheels to dislodge the jack and remove the old bellows

  4. Apply grease to the cylinder.
    • Apply grease to the cylinder.

  5. Install the new bellows, reference for this vehicle: Moog - K150129
    • Install the new bellows, reference for this vehicle: Moog - K150129

  6. Place the bellows with the two fasteners at each end.
    • Place the bellows with the two fasteners at each end.

    • Replace the screw, taking care to ensure that it is in the jack lug.

Finish Line

4 other people completed this guide.

Antoine vandervoode

Member since: 01/13/2019

236 Reputation

1 Guide authored

8 Comments

Hello, Why do you need to lift the car?

Alan dagand - Reply

Hello, thank you for this tutorial. Is it necessary to redo the alignment after replacing the bellows? Thank you

anthony.bramato - Reply

Many thanks for this very well explained tutorial.

Be careful to take the recommended parts. I bought from an auto parts supplier to have them immediately, it was adaptable, I struggled to put the bellows on anyway...

sylvie.bertrand34 - Reply

Thank you very much for your effort and thank you for this TUTORIAL, good luck

younsiibraham - Reply

Great tutorial, thanks the repair went very well

Nicolas VIVIERE - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 23

Past 30 Days: 127

All Time: 15,976