Tools
Parts
No parts specified.
Video Overview
-
-
With a diamond jack
-
The vehicle must be on a level surface
-
Place the diamond jack under the location provided at the level of the underbody
-
-
-
Using the crank, turn in the tightening direction to lift the vehicle
-
Raise enough to slide a jack stand under the vehicle
-
-
-
With a hydraulic jack
-
Place the hydraulic jack under the location provided at the level of the underbody
-
Push the lever down to raise the jack
-
Raise enough to slide a jack stand under the vehicle
-
-
-
Place the candle under the cradle or a reinforced point of the car
-
Adjust the candle to the height of the latter
-
Lower the vehicle onto the jack stand and remove the jack
-
-
-
Replace the jack (diamond or hydraulic) under the underbody and raise the car slightly to remove the jack stand.
-
Cancel: I did not complete this guide.
6 other people completed this guide.