Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Replacing the side indicator bulb on a Peugeot 206

Written By: arnaud.janssen (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 2

Difficulty

Very easy

Steps

7

Time Required

00:04:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Tools

No tools specified.

Parts

  1. On the Peugeot 206 there is a side indicator positioned on both front wings My indicator being white, the bulb inside must be orange. My indicator being white, the bulb inside must be orange.

    • On the Peugeot 206 there is a side indicator positioned on both front wings

    • My indicator being white, the bulb inside must be orange.

    Edit

  2. No tools are required for bulb replacement It is held in place by a clip system, you will need to push it to the right and pull it towards you. It is held in place by a clip system, you will need to push it to the right and pull it towards you.

    • No tools are required for bulb replacement

    • It is held in place by a clip system, you will need to push it to the right and pull it towards you.

    Edit

  3. Lift the tab to remove the electrical terminal The two staples The bulb holder

    • Lift the tab to remove the electrical terminal

    • The two staples

    • The bulb holder

    Edit

  4. Hold the indicator and turn the bulb holder a quarter turn. Hold the holder and pull the bulb out The bulb is very orange

    • Hold the indicator and turn the bulb holder a quarter turn.

    • Hold the holder and pull the bulb out

    • The bulb is very orange

    Edit

  5. Proceed in reverse order, hold the holder and push the bulb Proceed in reverse order, hold the holder and push the bulb

    • Proceed in reverse order, hold the holder and push the bulb

    Edit

  6. Locate the notches Screw the bracket back into the indicator a quarter turn Screw the bracket back into the indicator a quarter turn

    • Locate the notches

    • Screw the bracket back into the indicator a quarter turn

    Edit

  7. Reconnect the electrical terminal Put the indicator back in place, snap it on the right then push the left part to snap the clips in. Check for proper operation

    • Reconnect the electrical terminal

    • Put the indicator back in place, snap it on the right then push the left part to snap the clips in.

    • Check for proper operation

    Edit
Finish Line

2 other people completed this guide.

Author

with 1 other contributor

arnaud.janssen

Member since: 4/20/18

2,357 Reputation

36 Guides authored

0 Comments

Add Comment



View Statistics:

Past 24 Hours: 2

Past 7 Days: 20

Past 30 Days: 53

All Time: 3,536

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.