Replacing the rear suspension springs

Start by removing the shock absorbers (See Etape 1 - tutoriel de remplacement de l’amortisseur arrière droit)

Once the shocks are removed, the bridge should be low enough to remove the rear springs without any effort or spring compressor. Simply pull on the spring to remove it.

If the bridge is not low enough, you can move it further away from the chassis by having someone pry it up with a crowbar, or use a spring compressor (Reverse the procedure to reassembly)

Check that the new spring is compatible

I opted for a riser, so the spring is larger, but the assembly process is the same

Compress the new spring (Not necessary if you are two CF disassembling)

Use suitable spring compressors, tighten gradually on each side and never get in the way of the spring!

Place the new spring in the housing

Gradually unscrew the spring compressors on each side

Reassemble the shock absorber (See Etape 2 - tutoriel de remplacement de l’amortisseur arrière droit