Difficulty
Easy
Steps
7
Time Required
00:45:00
Ce tutoriel a été créé par la communauté
User contributed
-
-
For convenience, raise the car and place it on jack stands at the designated locations. This step is not mandatory, but it makes it easier for the operator.
-
-
-
Remove the upper nut and lower nut from the shock absorber
-
Loosen the lower nut using a 21 mm diameter long socket. Use a 21 mm diameter open-end wrench if the screw turns.
-
Loosen the top nut using a 18mm diameter short socket. Use an 18mm diameter open-end wrench if the screw turns.
-
-
-
In order to access the left shock absorber screw, it is necessary to remove the exhaust silencer flanges
-
Remove the right flange from the exhaust pipe
-
Remove the left exhaust flange
-
As with the right shock absorber, proceed to remove the nuts from the left shock absorber
-
Remove the left shock absorber
-
-
-
Install the left shock absorber
-
Install the right shock absorber
-
-
-
Tighten the lower nuts of the left and right shock absorbers to a torque of 15 Da Nm
-
Tighten the upper nuts of the left and right shock absorbers to a torque of 7 Da Nm
-
-
-
Reassemble the left exhaust silencer flange
-
Reassemble the right exhaust silencer flange
-
Remove the candles
-
Dispose of the shock absorbers at the recycling center in the container provided for this purpose.
-
Cancel: I did not complete this guide.
4 other people completed this guide.
3 Comments
yeah, but you have to be able to unscrew them first... by just lifting the car with a jack, the length of a standard wrench is not sufficient, you have to lift the car to have the lever arm
meillier.dominique - Resolved on Release Reply
I need to replace mine, this already gives me the way to do it. Thanks!
ericschweitzer9 - Resolved on Release Reply
It's great, I didn't know it was so easy to mount and dismount shock absorbers, thanks for the advice, I'll see next month to order them from you.
patrick claverie - Resolved on Release Reply
