Introduction
This tutorial will show you how to easily change your faulty light bulb.
-
-
The operation therefore takes place on a 2003 Golf 5.
-
When a bulb no longer works, a light should come on on your meter.
-
-
-
First of all, start by disconnecting the battery.
-
Slightly lift the carpet hiding access to the optical fixings.
-
Disconnect the connector using a flat-blade screwdriver.
-
Unscrew the two black bolts using a 10 wrench.
-
-
-
Remove the small black plate by unclipping the three clips.
-
Turn it a quarter turn counterclockwise to remove the burnt out bulb.
-
Put back a new light bulb
-
-
-
Reclip the black plate to the back of the optics, paying attention to the small seal.
-
Place the optic in its location, screw in the two black nuts, and reconnect the connector.
-
Take the opportunity to check all the other bulbs in the car (possibly with the help of a second person) before getting back on the road.
-
Cancel: I did not complete this guide.
9 other people completed this guide.
2 Comments
Hello, I ordered the Golf6 reversing light switch with you but I don't know where it is. Can you put a photo for me? Thank you Golf6 1.4 80 hp
Good evening I need your help please, I have a golf 6 to change the rear indicator lights I have unscrewed long plastic screws is there a second one at the bottom? BECAUSE I push the optics towards me it gets stuck at the bottom something that gets stuck Please
