Skip to main content
  1. 
Lift the rear passenger side seat and remove the black cover

Disconnect the two hoses (be careful, some petrol may leak)

Also disconnect the electrical connector
    • Lift the rear passenger side seat and remove the black cover

    • Disconnect the two hoses (be careful, some petrol may leak)

    • Also disconnect the electrical connector

  2. 
Unscrew the 6 pump fixing screws and remove the support "ring"

Extract the pump vertically

Extract the pump vertically
    • Unscrew the 6 pump fixing screws and remove the support "ring"

    • Extract the pump vertically

  3. 
Disconnect the two electrical terminals

Unclip the pump retaining "cover" and remove the pump

Remove the strainer (pull gently on it)
    • Disconnect the two electrical terminals

    • Unclip the pump retaining "cover" and remove the pump

    • Remove the strainer (pull gently on it)

    • Also remove the small piece of hose

  4. 
Check that both pumps are identical

Then reassemble the new pump in the reverse order of disassembly.
    • Check that both pumps are identical

    • Then reassemble the new pump in the reverse order of disassembly.

    • With the seat up and the plastic cover off, turn on the ignition (without starting) and listen for the pump to start for 1-2 seconds. Repeat 5-6 times then start.

Finish Line

2 other people completed this guide.

hrmuller t

Member since: 09/04/2017

3,352 Reputation

67 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 8

Past 30 Days: 36

All Time: 3,466