Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Replacing the engine fan resistor on Peugeot 206

Written By: arnaud.janssen (and one other contributor)
  • Comments: 1
  • Favorites: 0
  • Completions: 1

Difficulty

Easy

Steps

7

Time Required

00:20:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

Replacing the engine fan resistor on 206 2 Liters S16 138Cv

  1. Spot the resistance It is located behind the front bumper grille. It is located behind the front bumper grille.

    • Spot the resistance

    • It is located behind the front bumper grille.

    Edit

  2. I use a 3/4 ratchet with an extension and a 10MM hex socket The resistance comes out easily from the bottom So I pass my extension through my bumper grille c in order to unscrew the 10 screw

    • I use a 3/4 ratchet with an extension and a 10MM hex socket

    • The resistance comes out easily from the bottom

    • So I pass my extension through my bumper grille c in order to unscrew the 10 screw

    Edit

  3. Once the screw is loosened, extract the resistor Shift it to the left then towards yourself (it comes out without forcing) Disconnect it by pressing the small metal clips on the connector.

    • Once the screw is loosened, extract the resistor

    • Shift it to the left then towards yourself (it comes out without forcing)

    • Disconnect it by pressing the small metal clips on the connector.

    Edit

  4. Compare the old and the new. They are identical here. They are identical here.

    • Compare the old and the new.

    • They are identical here.

    Edit

  5. Identify the 3 lugs in order to correctly reconnect the connector Identify the 3 lugs in order to correctly reconnect the connector

    • Identify the 3 lugs in order to correctly reconnect the connector

    Edit

  6. Replace the resistor in its housing, Right side first then push it into its housing Finish by screwing in the 10mm screw

    • Replace the resistor in its housing,

    • Right side first then push it into its housing

    • Finish by screwing in the 10mm screw

    Edit

  7. The resistance replacement is now complete

    • The resistance replacement is now complete

    Edit
Finish Line

One other person completed this guide.

Author

with 1 other contributor

arnaud.janssen

Member since: 4/20/18

2,357 Reputation

36 Guides authored

One Comment

Hello. How do I do it on a 206 xt? Can you remove the nut? It's impossible to get your hands in from the top or bottom to loosen the terminal and the resistor. Thanks.

Charles - Open Reply

Add Comment



View Statistics:

Past 24 Hours: 13

Past 7 Days: 90

Past 30 Days: 337

All Time: 10,883

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.