Difficulty
Easy
Steps
3
Time Required
00:30:00
Ce tutoriel a été créé par la communauté
User contributed
Tools
Parts
-
-
Unclip the cover retaining clips
-
Remove the filter
-
Unscrew the 3 retaining nuts and the retaining collar
-
Lift the housing and unscrew the collar holding the oil vapor recycling hose, then completely remove the housing.
-
-
-
Disconnect the two air hoses
-
Disconnect the four coolant hoses
-
Disconnect the fuel hose
-
Disconnect the electrical connector
-
Release the throttle cable
-
-
-
Unscrew the 4 carburetor retaining screws and remove the carburetor.
-
Unscrew the 4 nuts holding the sole
-
Compare the two soles, reassemble the mass "braid" on the new sole
-
Proceed in the reverse order of removal for reassembly.
-
