Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Replacing rear pads on Mini 2.0 180hp

Written By: dlychar (and one other contributor)
  • Comments: 4
  • Favorites: 0

Difficulty

Moderate

Steps

13

Time Required

01:00:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

  1. Disassemble the wheel Disassemble the wheel

    • Disassemble the wheel

    Edit

  2. Disconnect the wear indicator Disconnect the wear indicator Disconnect the wear indicator

    • Disconnect the wear indicator

    Edit

  3. Using the 14 and 17 flat wrench, unscrew the two caliper screws. Using the 14 and 17 flat wrench, unscrew the two caliper screws. Using the 14 and 17 flat wrench, unscrew the two caliper screws.

    • Using the 14 and 17 flat wrench, unscrew the two caliper screws.

    Edit

  4. Disassemble the caliper Disassemble the caliper

    • Disassemble the caliper

    Edit

  5. Disassemble the brake pads Disassemble the brake pads

    • Disassemble the brake pads

    Edit

  6. Replace the pad holders Replace the pad holders

    • Replace the pad holders

    Edit

  7. Check that the pads match Check that the pads match

    • Check that the pads match

    Edit

  8. Using the piston rest, push the caliper piston back. Using the piston rest, push the caliper piston back. Using the piston rest, push the caliper piston back.

    • Using the piston rest, push the caliper piston back.

    Edit

  9. Install the new pads Install the new pads

    • Install the new pads

    Edit

  10. Install the caliper Install the caliper

    • Install the caliper

    Edit

  11. Using the 17 and 14 key, tighten the two caliper screws Using the 17 and 14 key, tighten the two caliper screws

    • Using the 17 and 14 key, tighten the two caliper screws

    Edit

  12. Connect the new witness Connect the new witness

    • Connect the new witness

    Edit

  13. Reassemble the wheel Tighten the wheel to the torque

    • Reassemble the wheel

    • Tighten the wheel to the torque

    • Do the same on the other side

    • Put the vehicle back on the ground

    • Pump the brake pedal until it becomes hard

    • Check the brake fluid level

    Edit
Finish Line

Author

with 1 other contributor

dlychar

Member since: 10/09/2017

10,341 Reputation

70 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 17

Past 30 Days: 51

All Time: 6,648

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.