Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

This guide has more recent changes. Switch to the latest unverified version.

Replacing rear light bulbs on Peugeot 5008

Written By: thomas martin (and 2 other contributors)
  • Comments: 16
  • Favorites: 0
  • Completions: 12

Difficulty

Very easy

Steps

5

Time Required

00:15:00

Sections

1

Flags

0

  1. Unlock the plastic cover by turning it 1/4 turn with a large flat screwdriver. Remove the plastic cover Unscrew the 2 headlight fixing screws (with une clé a pipe de 10)

    • Unlock the plastic cover by turning it 1/4 turn with a large flat screwdriver.

    • Remove the plastic cover

    • Unscrew the 2 headlight fixing screws (with une clé a pipe de 10)

    • the headlight is fitted, you have to pull to get it out of its housing

    Edit

  2. You must hold the headlight during the entire operation to avoid tearing an electrical wire. The bulb holder is fixed by 4 lugs, spread them one by one to open the headlight

    • You must hold the headlight during the entire operation to avoid tearing an electrical wire.

    • The bulb holder is fixed by 4 lugs, spread them one by one to open the headlight

    • Do not force too much, the fasteners are made of plastic, there is a risk of breakage

    • the lighthouse is open

    • feu clignotant

    • feu stop

    • night light (LED, no bulbs to replace)

    Edit

  3. Turn the bulb 1/4 turn to release it from the holder Compare the new and old bulb (base, power, etc.)

    • Turn the bulb 1/4 turn to release it from the holder

    • Compare the new and old bulb (base, power, etc.)

    • Replace the new bulb on the holder

    Edit

  4. Replace the gasket if necessary. Clip the 2 parts of the headlight together

    • Replace the gasket if necessary.

    • Clip the 2 parts of the headlight together

    • Check that they are all locked correctly

    Edit

  5. Insert the headlight notch into the plastic stud Insert the key into the rubber pad Revise the 2 screws of 10

    • Insert the headlight notch into the plastic stud

    • Insert the key into the rubber pad

    • Revise the 2 screws of 10

    • Replace the plastic cover and turn the fastener 1/4 turn

    Edit
Finish Line

12 other people completed this guide.

Author

with 2 other contributors

thomas martin

Member since: 9/12/16

389 Reputation

1 Guide authored

12 Comments

A huge thank you for this timely tutorial. Obviously, with my characteristic bad luck, I came across the only left rear light that refused to come off easily. So much so that I tested it on its right brother to see if it was me or it :-). Well, by passing a flexible plastic spatula between the bodywork and the light, it came off like a big boy without forcing.

I saved 15-20€ at the garage thanks to you and I feel less stupid in front of my car!

Herve

herve.foucher - Resolved on Release Reply

Hello, for me it's the right rear position light that no longer works. I don't understand what the bulb is: is it the same as the indicator? Thank you

luciole555fr - Resolved on Release Reply

Hello, I have the same problem...did you get an answer? Did you find a solution?

monadressechristelle -

Hello

Thanks for your tutorial, very practical.

bonnasserre43 - Resolved on Release Reply

Thank you, it saved me time and above all I didn't get angry with the car...

Patrice DANIEL - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 5

Past 7 Days: 55

Past 30 Days: 237

All Time: 54,450

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.