Skip to main content
  1. 
Pull the plastic clip using a'a screwdriver

fold down the carpet

fold down the carpet
    • Pull the plastic clip using a'a screwdriver

    • fold down the carpet

  2. 
Unscrew the black plastic nut

Push the clips

Shoot at the fire to extract it
    • Unscrew the black plastic nut

    • Push the clips

    • Shoot at the fire to extract it

  3. 
Unscrew the nut

Remove the light plate

Remove the light plate
    • Unscrew the nut

    • Remove the light plate

  4. 
Press and unscrew the bulb 1/4 turn to remove it

Compare the new bulb with the old one
    • Press and unscrew the bulb 1/4 turn to remove it

    • Compare the new bulb with the old one

  5. 
Tighten the nut

Connect the connector

Connect the connector
    • Tighten the nut

    • Connect the connector

  6. 
Replace the lights on the car

Screw the black plastic nut

Replace the trunk carpet and reattach the clip by pressing on it
    • Replace the lights on the car

    • Screw the black plastic nut

    • Replace the trunk carpet and reattach the clip by pressing on it

Finish Line

8 other people completed this guide.

Aurélie Osan

Member since: 05/06/2016

293 Reputation

1 Guide authored

2 Comments

Thanks for this Peugeot 206SW car model, but mine is a little different in shape: a little elongated towards the top, from the Peugeot model from 2002 to 2006. I have my left rear indicator light which is burnt out but I don't know how to access it. If someone could advise me to help me. thanks in advance.

JACOBIN VAHINISON - Reply

Thank you for this very well done tutorial which allows you not to get upset... You can get by without removing the connector but be careful not to pull on the cables...

ALAIN WOJTASZAK - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 20

Past 30 Days: 127

All Time: 28,638