Skip to main content
  1. 
Position the jack on the anchor point recommended by the manufacturer and raise the car

Position the candle under the cradle next to the triangle and place the car on the jack stand

Position the candle under the cradle next to the triangle and place the car on the jack stand
    • Position the jack on the anchor point recommended by the manufacturer and raise the car

    • Position the candle under the cradle next to the triangle and place the car on the jack stand

  2. 
Unscrew the 4 wheel bolts

Remove the wheel
    • Unscrew the 4 wheel bolts

    • Remove the wheel

  3. 
Secure the vehicle with a jack and a candle stand.

Location of the connecting rod

Location of the connecting rod
    • Secure the vehicle with a jack and a candle stand.

    • Location of the connecting rod

  4. 
Location of the stabilizer bar link attachments

Location of the stabilizer bar link attachments

Location of the stabilizer bar link attachments
    • Location of the stabilizer bar link attachments

  5. 
Hold the threaded rod using the appropriate tip (here T30 but it depends on the brand of connecting rods)

Loosen the nut using a suitable flat spanner (here 16 but it also depends on the brand of the connecting rods)
    • Hold the threaded rod using the appropriate tip (here T30 but it depends on the brand of connecting rods)

    • Loosen the nut using a suitable flat spanner (here 16 but it also depends on the brand of the connecting rods)

  6. 
Reassembly is carried out in reverse order.
    • Reassembly is carried out in reverse order.

Finish Line

Cedric Richelot

Member since: 10/11/2016

765 Reputation

10 Guides authored

One Comment

Hello

Well explained easy to understand

THANKS

gerard Lambezat - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 10

All Time: 466