Skip to main content
  1. Loosen the clamp connecting the silencer to the exhaust pipe using a 16 mm diameter open-end wrench. Loosen the clamp connecting the silencer to the exhaust pipe using a 16 mm diameter open-end wrench. Loosen the clamp connecting the silencer to the exhaust pipe using a 16 mm diameter open-end wrench.
    • Loosen the clamp connecting the silencer to the exhaust pipe using a 16 mm diameter open-end wrench.

  2. Remove the front and rear silent blocks holding the silencer Remove the silencer
    • Remove the front and rear silent blocks holding the silencer

    • Remove the silencer

  3. Replace the muffler Replace the silentblocs if necessary or reassemble the old ones Replace the silentblocs if necessary or reassemble the old ones
    • Replace the muffler

    • Replace the silentblocs if necessary or reassemble the old ones

  4. Replace the silencer using the silentblocs Connect the muffler to the exhaust pipe using the clamp Use a large flat screwdriver to spread the flange if necessary.
    • Replace the silencer using the silentblocs

    • Connect the muffler to the exhaust pipe using the clamp

    • Use a large flat screwdriver to spread the flange if necessary.

    • Adjust the muffler so that it is in the middle of the location provided in the bumper

    • Tighten the flange using a 16 mm diameter open-end wrench.

  5. Throw the old silencer in the recycling center in the container provided for this purpose.
    • Throw the old silencer in the recycling center in the container provided for this purpose.

    • Start the car to check for noise and possible smoke leaks

Finish Line

6 other people completed this guide.

gregorydurand

Member since: 07/12/2017

1,746 Reputation

15 Guides authored

4 Comments

Clear and concise tutorial.

thierry.alcali - Reply

Good morning

I think the measurement is overall, but I can't say for sure. For my part, I bought the first silencer on the site, namely the WALKER - 21884 (680 mm).

Sincerely

gregorydurand - Reply

Could you tell me how to measure the length of the replacement muffler in order to purchase it (Overall? Muffler only?)

For example, for the same vehicle, 4 models: 720 mm; 760 mm; 705 mm; 750 mm.

Thanks in advance

Michel LAMONTAGNE - Reply

thanks for the tutorial

I am able to do it

Francis

Francis QUILHAC - Reply

Add Comment

View Statistics:

Past 24 Hours: 6

Past 7 Days: 31

Past 30 Days: 154

All Time: 14,213