Replace exhaust silencer on Peugeot 206

Loosen the clamp connecting the silencer to the exhaust pipe using a 16 mm diameter open-end wrench.

Remove the front and rear silent blocks holding the silencer

Remove the silencer

Replace the muffler

Replace the silentblocs if necessary or reassemble the old ones

Replace the silencer using the silentblocs

Connect the muffler to the exhaust pipe using the clamp

Use a large flat screwdriver to spread the flange if necessary.

Adjust the muffler so that it is in the middle of the location provided in the bumper

Tighten the flange using a 16 mm diameter open-end wrench.

Throw the old silencer in the recycling center in the container provided for this purpose.

Start the car to check for noise and possible smoke leaks