Difficulty
Moderate
Steps
3
Time Required
00:45:00
Ce tutoriel a été créé par la communauté
User contributed
-
-
If you don't have a pit, lift the car by the jacking points. Use several jack stands to raise it completely so that it is level.
-
-
-
First start by unscrewing the filler screw, not completely, just to see if it is not seized because if you start with the drain screw and you are stuck with the filler screw it will prevent you from no longer being able to move the car.
-
You will need a 17mm wrench or socket
-
I personally use this type of filling bulb.
-
-
-
For filling, plan on 2 liters of API GL4 75w80 oil. No seals need to be replaced for this operation.
-
The level is done by overflow, once you see the oil flowing from the filling hole, wait for the drip then replace the cap.
-
Cancel: I did not complete this guide.
2 other people completed this guide.
