Difficulty
Easy
Steps
3
Time Required
00:01:00 - 00:10:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Good morning,
When your turn signal and/or position light optics are in poor condition, you can simply change them without having to change the entire unit.
This tutorial shows you how to put new optics in place.
Tools
Parts
-
-
We do the same thing on the front passenger side.
-
There are 3 Phillips screws to remove to remove the turn signal lens.
-
-
-
Once the 3 screws are removed, simply pull the optic towards you.
-
You can take the opportunity to clean the inside of the unit or change the defective bulbs (indicator and/or position lights).
-
-
-
Place the optics on the block, then put the two screws on the front, by hand.
-
The third screw, on the side, requires the use of the screwdriver to screw it in.
-
First position the three screws, then screw them in one by one.
-
