Cancel: I did not complete this guide.
11 other people completed this guide.
Past 24 Hours: 1
Past 7 Days: 3
Past 30 Days: 21
All Time: 9,152
© 2024 Oscaro.com Tous droits reservés.
11 Comments
no torque tightening!!!
vinz8305 - Resolved on Release Reply
Great tutorial, I just made my rear shock absorbers without apprehension! Just one thing: the screws at the bottom of the shock absorbers are not fixed to the body of the shock absorber, so you have to tighten the head of the bolt with a wrench while unscrewing/tightening the screw! (But the ones I just changed may not have been original) Thanks again!
jean marie975 - Resolved on Release Reply
merci beaucoup explication simple et efficace
laurence peytout - Resolved on Release Reply
Bravo !! Explication Simple, claire et belles photos. Merci Sébastien
Corinne VUILLAUME - Resolved on Release Reply
Good evening and thank you Corinne. Sébastien.
sebastienherbomel -
Absolutely BRILLIANT!!
Thank you for taking the time to make these kinds of tutorials for beginners!
Arnaud Genilier - Resolved on Release Reply
Thanks Arnaud, that's a pleasure. Have a good trip driving your Megane. Sebastien
sebastienherbomel -
Very precise tutorial, thank you very much!
Jean-Marc DUWICQUET - Resolved on Release Reply
Thank you Jean-Marc and have a good trip.
sebastienherbomel -
Good evening and thank you for this clarification, I did indeed make a mistake on the dimension of the Ratchet.
sebastienherbomel - Resolved on Release Reply
Very clear tutorial that helped me a lot.
Just a small correction, the ratchet and its accessories have a 1/2 and not 1/4 inch square.
FRANCOIS JEZIOREK - Resolved on Release Reply