Tools
Parts
-
-
The vehicle's window control pad is located in the driver's side door trim.
-
The assembly is clipped into the armrest and held in place by a fixing screw.
-
Use a torx key
-
-
-
Remove the door trim housing
-
Turn the assembly over to access the electrical connectors
-
Use a flathead screwdriver to disconnect the plug
-
-
-
Reconnect the two connectors to the new control box
-
Place the assembly in the door trim
-
-
-
Check that the paving stone is properly clipped and secure it with the screw
-
Cancel: I did not complete this guide.
One other person completed this guide.
