Changing the trunk struts - Peugeot 307

Written By: hemissi-nizar (and one other contributor)

Difficulty

Easy

Steps

Time Required

00:15:00

Introduction

Engine of the vehicle Peugeot 307 SW 1.6 HDi FAP 16V 110 hp

Open the trunk.
Secure the top of the tailgate with a broom or have someone help you hold it open.
Using a flat screwdriver, remove the retaining clip at the top of the cylinder.
Using a flat screwdriver, remove the retaining clips at the bottom of the cylinder.

Clean the jack fasteners with a cloth and grease the jack fasteners.
Push the hollow end of the jack onto the ball joint of the clip until you hear a "click" of the clip locking.
In the same way as the previous step, push the other hollow end of the jack onto the ball joint of the clip until you hear a "click" of the clip locking.

Finish Line

14 other people completed this guide.

Member since: 01/16/2017

21,057 Reputation

88 Guides authored

bravo simple précis efficace merci

Good morning

Thanks for the explanation, which can be applied to any car (mine is completely unrelated)

Thank you very much in any case

Hello dear contributor,

For your vehicle the difference in cylinder length is minimal. You can choose your cylinders by clicking on the link below: https://www.oscaro.com/verin-de-hayon-de... .

At your disposal for any further questions.

Yours sincerely,

The Oscaro Team

Which jack should I choose for a 2003 307 sedan? Length?

Clear, precise, perfect