Skip to main content
  1. Unclip the top of the jack using a thin flat screwdriver, pass it between the clips and the ball joint. Unclip the top of the jack using a thin flat screwdriver, pass it between the clips and the ball joint. Unclip the top of the jack using a thin flat screwdriver, pass it between the clips and the ball joint.
    • Unclip the top of the jack using a thin flat screwdriver, pass it between the clips and the ball joint.

  2. Unclip the lower ball joint in the same way. Unclip the lower ball joint in the same way. Unclip the lower ball joint in the same way.
    • Unclip the lower ball joint in the same way.

  3. Place a broom in the trunk to lock the trunk in the open position. Place a broom in the trunk to lock the trunk in the open position.
    • Place a broom in the trunk to lock the trunk in the open position.

  4. Remove the jack from the top then the bottom Remove the jack from the top then the bottom Remove the jack from the top then the bottom
    • Remove the jack from the top then the bottom

  5. Make sure the lengths match between the old and new trunk cylinders.
Finish Line

6 other people completed this guide.

Félix DELANOE

Member since: 04/23/2016

5,059 Reputation

32 Guides authored

3 Comments

Super avec les photos .... Facile !!!

Merci

philcommynes - Reply

Impeccable! Very clear tutorial! Thank you!

jj.medard - Reply

Very clear tutorial. Jacks changed in 3 minutes flat… thank you very much!!!!

Alexandra Bour - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 11

Past 30 Days: 40

All Time: 4,040