Tools
Parts
-
-
To block the tailgate, place a brush
-
Locate the two clips holding the cylinder in place.
-
-
-
Position the flat screwdriver between the clips and the top of the jack
-
unclip and remove the top of the jack
-
-
-
Position the flat screwdriver between the clips and the bottom of the jack
-
unclip and remove the jack
-
-
-
Insert the bottom of the jack into its location
-
Insert the top of the jack into its location
-
Do the same operation on the other side of the tailgate.
-
Remove the broom
-
Perform a test of the cylinders by opening and closing the tailgate
-
Cancel: I did not complete this guide.
One other person completed this guide.