Skip to main content

Introduction

This tutorial guides you step by step to change the trunk struts on Renault Twingo II

  1. Open the trunk Using the flat screwdriver, remove the two small tabs located at the ends of the jacks.
    • Open the trunk

    • Using the flat screwdriver, remove the two small tabs located at the ends of the jacks.

    • You can then remove them very simply by unplugging them from their housing.

    • Block the trunk with a person or a broom while the jacks are being changed

  2. Check the correspondence between the old and new cylinders (length + hooks)
    • Check the correspondence between the old and new cylinders (length + hooks)

  3. Clip the new cylinders back in, starting with the bottom end. Do the same at the top
    • Clip the new cylinders back in, starting with the bottom end.

    • Do the same at the top

    • Repeat the operation with the second jack

Finish Line

One other person completed this guide.

lesly

Member since: 06/19/2020

118 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 11

Past 30 Days: 60

All Time: 1,570